1.Plug in your Ethernet Cable to the LAN port of the recorder.
2. Make sure that your recorder are on the same subnet in your network.
To check your subnet address, you can do the following:
2.1 Log in to your computer, click on windows icon>> at the search box, type in “cmd” and click ok.
2.2. A new cmd window will pop up, kindly type in “ipconfig”.

 

Note: Your default gateway is 192.168.16.1, hence, your subnet is “.16”.
All devices that will connect to your router should have an address
of .16. (eg. 192.168.16.32 or 192.168.16.52).

3. Open an Internet Explorer 32 bit and log on to www.nsvsip.com.