iSecure POES16 Poe Switch
iSecure POES16 is 16+4 ports Standard POE switch provides power and data to wireless access point and IP camera, using Power over Ethernet(PoE) over a single Cat-5 cable. The 16 Ethernet ports can be used for any 10/100 Mbps link and also can supply industry-standard IEEE 802.3af power. Advanced Auto detection gives power only to 802.3af powered devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the standard automatically determines PoE requirements, speed, duplex, and cable type using Auto detection.
Description
POE
POE PORT: 1-16
POE Standard: IEEE802.3AF IEEE802.3AT
POE power pin: Endspan: 1/2(+) 3/6 (-)
POE power: 30w（at）, 15.4w（af）
RJ45
Rj45 port:1-16
Speed: 1-16 10M/100M 17-20 10M/100M
Manage parameter
Manage parameter: IEEE 802.1Q VLAN
IEEE 802.1p
QoS
802.3ad trunk
802.1D
RFC1157 SNMP v1
RFC1213 MIB II
RFC 1643 Ethernet Interface MIB
RFC 1493 Bridge MIB
DHCP client
PERFORMANCE PARAMETER
Backplane bandwidth: 4.0G
network delay: <20 ms
Packet forwarding rate: 6.5Mpps
The packet buffer memory: 256KB
The address database size: 8000
The mean time to failure: 5 years
NETWORK PROTOCOL
network protocol: IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
IEEE 802.3ab 1000BASET
IEEE 802.3z 1000BASEX
POE standard:IEEE802.3AF IEEE802.3AT
POWER SUPPORT
power supply: 48-55VDC 300w
Characteristics: Buit in PFC
SIZE
Long*wide*high: 440*290*45mm
Weight: 3.5kg
ENVIRONMENTAL SPECIFICATION
operation temperature: -20° -70°C（ 32° 104° F）
Storage temperature: -40° -85°C （14° 158° F）
Operating humidity: 10% 90%, no condensation
Operating height: 3000 meters above sea level (10000ft)
Radiation and Safety Radiation: CE mark,commercial
FCC Part 15 Class A
EN 55022 (CISPR 22),Class A
Safety: CE/LVD EN60950
